User`s guide

Chapter 4 Configuring Your Library
Configuring Drive Cleaning
Scalar i6000 User’s Guide 218
3 Click the cleaning media in a cleaning magazine to select it, and then
do one of the following:
• To export only the selected piece of media, click Menu, and then
click Export cleaning media <barcode number>.
• To export all media in the selected magazine, click Menu, and
then click Export all cleaning media in magazine.
The cleaning media is moved to an available I/E station magazine.
4 Click Close to close the Drive Cleaning Configuration dialog box.
Unassigning a Cleaning
Magazine 4
If a magazine is no longer needed for holding cleaning media, first export
all cleaning media from the magazine, and then unassign it.
1 Make sure that you are viewing the physical library. From the View
menu, click the name of the physical library.
2 On the menu bar, click Setup→ Drive Cleaning.
The Drive Cleaning Configuration dialog box appears. If the library
has more than one module, click the arrow buttons to display the
next or previous module.
3 If the magazine you want to unassign contains cleaning media,
export all cleaning media to the I/E station.
For more information on exporting cleaning media, see Exporting
Cleaning Media on page 217.
4 Click any slot in the cleaning magazine to select it.
5 Click Menu, and then click Unassign magazine for cleaning.
The magazine is no longer assigned for cleaning.
6 Click Close to close the Drive Cleaning Configuration dialog box.