User`s guide

Chapter 4 Configuring Your Library
Configuring Drive Cleaning
Scalar i6000 User’s Guide 217
6 To assign a magazine for cleaning, click any slot in the magazine to
select it. Click Menu, and then click Assign magazine for cleaning.
The magazine is assigned for cleaning.
7 Repeat this
step to assign additional cleaning magazines.
8 To import cleaning media, click
the cleaning media in the I/E station
to select it, and then do one of the following:
• To import only the selected piece of media, click Me
nu, and then
click Import <barcode number> as cleaning media.
• To import all media in the selected I/E station magazine, click
Me
nu, and then click Import all tapes in magazine as cleaning
media.
The cleaning media is moved to an availab
le cleaning magazine, and
can be used for automatic or manual cleaning.
9 Click Close to close
the Drive Cleaning Configuration dialog box.
If you are working on the remote LMC, you can
right-click a magazine slot or a piece of cleaning
media to see a menu of available options.
Exporting Cleaning Media4
Cleaning media can be used a limited number of times. If a piece of media
is expired, export it and remove it from the library
1 Ma
ke sure that you are viewing the physical library. From the View
menu, click the name of the physical library.
2 On
the menu bar, click Setup→ Drive Cleaning.
The Drive Cleaning Configuration dialog
box appears. If the library
has more than one module, click the arrow buttons to display the
next or previous module.
To determine if a piece of cleaning media has been used the
maximum numbe
r of times, click the media to select it, and then
check the Mount Count value under Information.
Note