User`s guide

Chapter 4 Configuring Your Library
Configuring Devices
Scalar i6000 User’s Guide 199
The following table describes the descriptors that appear in the Show
Details view for drives.
Table 23
Descriptor Description
[Number]
[Connection Type]
[Port Conne
ction]
[LUN] [Fibre or SCSI] [Port Number].
Vendor ID Drive manufacturer.
Serial Number Drive serial number.
Partition Name of the partition with which the d
rive is associated.
Descriptors
In the default view, only the names of available partitions and the
names of the devices (drives) are shown. LUN spaces from 0-255 are
available. In the Show Details view, a partition that has not yet been
manually reassigned to a new map position appears in heavy black
type in the Internal LUN column. Partitions are treated by the system
as devices. You must assign a partition to the LUN/External LUN
column for the LMC to manage it and its media. In this example, the
control LUN has already been remapped as shown in heavy black
type in the LUN/External LUN column.
6 If y
ou are working from the local touch screen, you must select an
internal device LUN, select the left arrow, and then select the desired
external LUN. If you are working from the remote client, you can use
the select method or you can drag and drop the devices from the
Internal LUN column to the appropriate LUN assignment in the
LUN/External LUN column. Always use LUN 0 for command and
control.