User`s guide

Chapter 4 Configuring Your Library
Configuring Devices
Scalar i6000 User’s Guide 195
5 Change the Name, Type, or Port. You can not change the WWN.
6 Click OK.
The Host Configured portion of the dialog box displays the host that
you modified.
7 To close the dialog box, click Cancel.
Deleting SNW Host 4
1 Log on as an administrator.
2 To ensure you are working from the physical library, from the main
console, select View and click the name of the physical library.
3 Click Setup > Device > Access > SNW Host.
The Storage Networking Host Configuration dialog box appears.
4 Select a check box for the appropriate host from the Host
Configuration table then click Delete.
Only one host can be selected for this operation.
FC Host LUN Mapping 4
Use the FC Host LUN Mapping dialog box to give a selected host access
to partitions and drives.
Configuring LUN Mapping 4
1 Log on as an administrator.
2 To ensure you are working from the physical library, from the main
console, select View and click the name of the physical library.
3 Click Setup > Device > Access > FC Host.
The FC Host dialog box appears.
4 With a host selected on the FC Host dialog box, click LUN Mapping.
Note
The delete button is unavailable if the host is
online.