User`s guide

Chapter 4 Configuring Your Library
Configuring Devices
Scalar i6000 User’s Guide 192
This action filters the drives in the Drive Access table and show only
those drives that belong to the partition selected. By default all SNW
drives will be displayed.
In the Partition Access section, the partitions are displayed.
8 Select drives.
To select all drives in the Drive Access table, click the Select All
Drives check box; to select individual drives, select the check box for
each drive.
When a drive check box is selected/unselected the color of the row in
the table will change to indicated the change to the current drive
configuration. The colors have the following meaning GREEN (access
will be granted to the host selected in the HOST LIST), YELLOW
(access will be denied to the host selected in the HOST LIST) and
WHITE (no change has been made).
The drives that are presented in the Drive Access table have the
following characteristics:
• They have a SNW license.
• They are HP LTO-5 fibre drives.
• They are connected to a Ethernet Expansion Blade.
9 Select partitions.
To select all partitions in the Partition Access table, click the Select
All Partitions check box; to select individual partition, select the
check box for each partition. When a partition is selected/unselected
the table row color will change indicating the new configuration
requested. The colors have the same meaning as the drive table
described above.
The partitions that are presented in the Partition Access table have
the following characteristics:
• They contain one or more SNW licensed drives.
• They have a Control Path drive configured.
10 To make changes to a number of hosts, follow steps 6 through 9 for
each host.
11 Click OK to apply the changes.
The Host is configured.