User`s guide

Chapter 4 Configuring Your Library
Configuring Devices
Scalar i6000 User’s Guide 185
Accessing FC Hosts 4
1 Log on as an administrator.
2 Make sure that you are viewing the physical library. From the View
menu, click the name of the physical library.
3 Click Setup→ Device→ Access→ FC Host.
The FC Host dialog box appears.
Only the host’s port, blade, and World Wide Name (WWN) appear.
Adding, Modifying, and Deleting FC Hosts 4
You can add and configure FC hosts without powering down the system.
Manually add an FC host if it was not already connected to the library
when it was turned on.
Adding an FC Host 4
1 Log on as an administrator.
2 Make sure that you are viewing the physical library. From the View
menu, click the name of the physical library.
3 Click Setup→ Device→ Access→ FC Host.
The FC Host dialog box appears.
4 Click Create.