User`s guide

Chapter 4 Configuring Your Library
Configuring Devices
Scalar i6000 User’s Guide 175
Device IDs 4
From a partition, you can change the SCSI ID for a SCSI-attached drive or
the Loop ID for a Fibre-attached drive. For example, the default SCSI ID
for a drive that you are installing might conflict with the assigned SCSI ID
of an existing drive. You might be using an application that expects to
communicate with a device at a specific SCSI ID, but that ID might already
have been configured for use in another partition. Use the Setup→
Device→ IDs command to correct these situations.
1 Log on as an administrator.
2 Make sure that you are viewing the partition that includes the drive
you want to configure. From the View menu, click the name of the
appropriate partition.
3 Click Setup→ Device→ IDs.
The Device IDs dialog box appears. (The following two examples
show the SCSI version of the Device IDs dialog box, and then the FC
version.)