User`s guide

Chapter 4 Configuring Your Library
Setting Up E-mail Notifications
Scalar i6000 User’s Guide 167
Testing the Current E-
Mail Configuration 4
To test the current e-mail configuration:
1 Log on
as an administrator.
2 Ma
ke sure that you are viewing the physical library. From the View
menu, click the name of the physical library.
3 Click Setu
p→ Email Configuration.
The Emai
l Configuration dialog box appears.
4 Type
an e-mail address in the Recipient box of the Test Current
Configuration area and click Test email.
5 Confi
rm that the library displays a message indicating that the test
completed successfully and sends a test message to the specified e-
mail address.
The subject of the test message should
be “Test email from Scalar
i6000” and the message text should include the library name, version,
and serial number, along with the date and time that the message
was sent.
6 Click OK
to close the Email Configuration dialog box.
Setting Up E-mail Notifications
You can set up notifications in the LMC so that the library automatically
sends an e-mail message to specified e-mail addresses whenever an issue
of a particular severity level occurs. The information in the e-mail
notification provides details about the issue and the library conditions at
the time of the error.
Before you set up notifications, you must configure
e-mail in the LMC so that the library can send
notifications to the recipients. See
Configuring
E-mail on page 164.
Table
21 describes the severity levels for which the library can send
notifications if e-mail addresses are set up appropriately to
receive them.
Note