User`s guide

Chapter 4 Configuring Your Library
Specifying the Date and Time
Scalar i6000 User’s Guide 163
The Date and Time dialog box appears.
4 In the NTP section
• If you choose to enable NTP, click Enable.
The Date and Time sections of the dialog box are grayed out.
• Type valid IP addresses for the Primary Server and optionally
the Secondary Server.
• If the DNS Server has not been configured in the LMC, type
valid numeric IP addresses that are accessible from the
library (example 111.11.11.111). You have the option of using
one or two IP addresses. Go to step 7.