User`s guide

The Logical SN Addressing area is available only to

CSEs. You cannot enable or disable logical serial

number addressing for drives. If a CSE enables this

feature, the library assigns logical serial numbers to

all drives in the library. Specifically, the library

assigns a logical serial number to a drive in a specific

location. This is not the serial number of the

particular drive. If a drive is replaced by another

drive in the same library location, the logical serial

number remains the same. From the host’s

perspective, the replacement drive is the same as the

original one.

Chapter 4 Configuring Your Library

Setting Up Policies for the Physical Library

Scalar i6000 User’s Guide 161

7 Select Enable in the IPv6 area to enable the Network Configuration

dialog that you can use to configure the settings for an IPv6 network

connection.

Enabling IPv6 adds a submenu to the Network

Configuration command on the Setup menu that

you use to display the IPv4 or IPv6 Network

Configuration dialog.

IPv6 is disabled by default.

8 Select

Enable in the Extended I/E area to enable the Extended I/E

feature.

Extended I/E is disabled by default.

Extended I/E allows the user the capability to

increase the number of I/E slots presented to the

host. For more information, refer to

Extended I/E

Option on page 23

9 Select

Enable in the EKM Path Diagnostics area to enable EKM

background diagnostics.

Note