User`s guide

Chapter 4 Configuring Your Library
Managing Connectivity
Scalar i6000 User’s Guide 156
The FC Host Port Failover dialog box appears
6 In the Feature Enable area, select Enable FC Host Port Failover, and
then click Set to make the Configuration tab available.
On the Configuration tab, settings are unavailable if the current state
of the tab is set to Disabled.
Be aware that there might be incompatibilities with channel zoning
configuration on the I/O blade if you enable host port failover.
7 Accept the recovery setting default values unless an authorized
representative advises you otherwise.
8 Before you set recovery settings, understand the following elements
in the Recovery Setting area:
• Error count recovery mode sets the recovery scenario for all ports
when port failure is caused by excessive errors on the port. The
only setting option is Require Intervention.