User`s guide

Chapter 4 Configuring Your Library
Managing Connectivity
Scalar i6000 User’s Guide 155
To configure HPF, perform the following steps:
1 Log on as an administrator.
2 Make sure that you are viewing the physical library. From the View
menu, click the name of the physical library.
3 Confirm that there are two ports on the I/O blade in target mode and
point-to-point connection. For more information, see
FC Host on
page 184.
4 Click Setup→ Connectivity→ FC Host Port Failover.
The FC Host Port Failover dialog box appears, showing all the I/O
blades found in the library. Each blade is identified by name and by
location.
5 Click a blade to highlight it, and then click Configure.