User`s guide

Chapter 4 Configuring Your Library
Working With Partitions
Scalar i6000 User’s Guide 140
20 Verify that the parameters you set are correct.
21 If the summary
information is correct, click Modify.
The Partitions - Completed dialog box appears.
22 Revie
w the information to make sure it is correct.
23 If
you want to view the drive information after modifying the
partition, click Next.
24 Click Fi
nish.
The P
artitions dialog box appears again.
25 Click Close.
Downloading Drive Firmware for Autoleveling
4
Before you begin the following procedure, make
sure that you have obtained the new drive
firmware image from Quantum technical support
and placed it in an accessible location on your
laptop.
1 On the Partitions - Step 6: Configure Drive Firmware Autoleveling
dialog box, click Manage Images.
Note
After you click Modify, the Cancel button becomes
unavailable.
Note