User`s guide

Chapter 4 Configuring Your Library
Working With Partitions
Scalar i6000 User’s Guide 137
8 To continue, click Next.
The Partitions - Step 3: Select Drives dialog box appears.
9 Select the location of one or more drives.
Make sure that you select the appropriate module because the library
can have drives in the control module and in any of the expansion
modules.
10 You can add a drive to the partition by selecting the appropriate
drive check box. You can delete a drive from the partition by clearing
the drive's check box. You can identify a drive by its serial number
and location coordinates.
11 To continue, click Next.
The Partitions - Step 4: Select Storage Slots dialog box appears.
12 Select the rack you want to modify.
13 You can add an I/E station magazine by selecting the appropriate
check box. You can delete an I/E station magazine by clearing its
check box. You can identify an I/E station magazine by its location
coordinates.
14 To continue, click Next.
The Partitions - Step 5: Select I/E Slots dialog box appears.
15 Select the location of one or more I/E station magazines.
Make sure that you select the appropriate module because the library
can have I/E stations in the control module and in expansion
modules.
16 You can add an I/E station magazine by selecting the appropriate
check box. You can delete an I/E station magazine by clearing its
check box. You can identify an I/E station magazine by its location
coordinates.
Note
Automatic drive cleaning should be enabled for
partitions only if the host application does not
support the coordination of drive cleaning. If drive
cleaning functionality is enabled on the host
application, do not enable automatic drive cleaning
for any partitions in the library.