User`s guide

This procedure includes instructions for
downloading new drive firmware images. You can
modify partitions from either the library’s touch
screen or a remote client. However, if you want to
download drive firmware images, you must do so
from a remote client.
Chapter 4 Configuring Your Library
Working With Partitions
Scalar i6000 User’s Guide 135
To modify an existing partition, perform the following steps:
1 Log on
as an administrator.
2 Make sure that you are viewing the physical library. From the View
menu, click the name of the physical library.
3 Click Setu
p→ Partitions→ Configure.
The P
artitions dialog box appears.
4 Select the partition you want to change, and then click Modify.
The Partitions - Step 1: Choose Partition Properties dialog box
appears.
For LMP partitions, you can not modify these
properties; all options will be disabled.
5 On this dialog box, you can modify the partition Name, Vendor ID,
and Product ID.
Note
Note
If you want to cancel the partition modification
process, click Close. The Close button becomes
unavailable after you click Modify later in this
procedure.
Note
If the physical library is not offline, you receive a
message that asks you whether you want to
modify the partition, requiring the library to be
taken offline. Click Yes. No host will be able to
access the partition while the library is offline.
Note