User`s guide

Chapter 4 Configuring Your Library
Working With Partitions
Scalar i6000 User’s Guide 133
12 To continue, click Next.
The Parti
tions - Step 5: Select Storage Slots dialog box appears.
13 In the
left column, select the location of one or more I/E station
magazines.
14 To as
sign a storage slot, select the appropriate check box. You can
identify a storage slot by its location coordinates. The number of slots
available is determined by the drive media type.
15 To con
tinue, click Next.
The Parti
tions - Step 6: Select I/E Slots dialog box appears.
16 Sele
ct the location of one or more I/E station magazine.
a Ma
ke sure that you select the appropriate module because the
library can have I/E stations in the control module and
expansion modules.
b To assign an I/E
station magazine, select the appropriate check
box. You can identify an I/E station magazine by its location
coordinates.
17 To con
tinue, click Next.
Depending on whether Extended I/E is enabled,
Step 6: Select Extended I/E Slots may appear. See
the next step. If Extended I/E is not enabled, go to
step 19.
To enable Extended I/E, go to Setup > Physical
Library, and select the feature. For more
information about Extended I/E, refer to
Extended
I/E Option on page 23
18 In the Part
itions - Step 6: Select Extended I/E Slots dialog box, do the
following:
a In the
left column, select the location of one or more Extended
I/E station magazines.
b To assign an Ext
ended I/E station magazine, select the
appropriate check box. You can identify an I/E station magazine
by its location coordinates.
The Partitions - Summary Information dialog box
appears.
Note