User`s guide

Chapter 4 Configuring Your Library
Working With Partitions
Scalar i6000 User’s Guide 128
drive cleaning for the library. For more information about
configuring drive cleaning, refer
Configuring Drive Cleaning on
page 214.
9 To continue, click Next.
The Partitions - Step 4: Choose Resource Quantities dialog box
appears.
10 Type the number of elements to include in the partition by
specifying:
•Number of drives
• Number of storage slots
• Number of I/E slots
The quantity available for each type of resource indicates resources
not yet assigned to existing partitions.
11 To continue, click Next.
The Partitions - Summary Information dialog box appears.
12 Verify that the parameters you set are correct.
13 To create the partition, click Create.
The Partitions - Completed dialog box appears.
14 Review the information to make sure it is correct.
15 If you want to view the drive information after creating the partition,
click Next.
Note
Automatic drive cleaning should be enabled for
partitions only if the host application does not
support the coordination of drive cleaning. If drive
cleaning functionality is enabled on the host
application, do not enable automatic drive cleaning
for any partitions in the library.
Note
After you click Create, the Cancel button becomes
unavailable.