User`s guide

Chapter 4 Configuring Your Library
Enabling Licenses
Scalar i6000 User’s Guide 110
Prerequisites 4
Before you run the Setup Wizard, do the following:
• Note the name and IP address of your network Domain Name Server
(DNS) or the IP address, subnet mask, and default gateway for your
network segment.
• Verify that your network is attached to the library network
connection.
• Delete the default partition. Refer to Deleting Partitions on page 142
for more information.
Accessing Setup Wizard4
To access the setup wizard, log on as an administrator from the library’s
touch screen, make sure that you are viewing the physical library, and
then click Setup > Setup Wizard.
Enabling Licenses
The following situations require you to enable license keys:
• During initial installation and configuration of the library. For more
information about enabling licenses for the first time, see the Scalar
i6000 Installation Guide.
• During a capacity on demand (COD) or feature upgrade, such as
when you want to enable the Drive Resource Utilization Reporting
feature.
• When you need to activate additional storage slots in your current
COD configuration.
If you cannot locate the license keys shipped with the library, you can
obtain them by contacting technical support or, if you are an end user, by
contacting your inside sales representative.