User`s guide

A UDS-2 drive with no fiber optic cable plugged in is
healthy if the link LED is solid off. A UDS-3 drive with
no fiber optic cable plugged in is healthy if the LED is
amber and blinking at regular intervals, indicating
that the library has enabled the drive data bus, but no
light is detected.
Chapter 3 Troubleshooting Your Library
Interpreting LEDs
Scalar i6000 User’s Guide 93
I/O Blade Fibre Port Link
LED 3
The link LED for an I/O blade fibre port is located next to the port. On the
I/O blade faceplate, black lines indicate how each link LED belongs to a
port. Figure
17 shows the locations of the I/O blade Fibre port link LEDs.
Figure 17 Locations - Colors of
I/O Blade Fibre Port Link LEDs
I/O blade link LEDs
- left = green (belongs
to port below)
- right = green (belongs
to port above)
Note