User`s guide

Chapter 3 Troubleshooting Your Library

Interpreting LEDs

Scalar i6000 User’s Guide 90

Table 9 Drive Sled Status LED

States (UDS-2 and UDS-3)

LED Color Represents Possible States and Explanations

Green Processor status • Solid off — drive sled’s main processor is not operating (or

blad

e is booting)

• Solid on — drive sled’s main processor is not operating

• Blinks one time every second (1 Hz) — drive sled’s main

ocessor is operating normally

• Blinks 10 times every second (10 Hz) — identify mode

• Solid on for three seconds, then blinks twice at 1 Hz, and

then

repeats — drive sled or drive brick firmware is

downloading

• Blinks three times in three seconds

(1 Hz), then pauses

(solid off), and then repeats — drive brick is activating

(varying on)

Amber Health status • Solid off — drive sled’s controller (drive DC to DC

nverter [DDC]) is operating normally

• Solid on — drive sled’s DDC has failed

Blue Power control status • Solid off — drive sled is not receiving power

• Solid on — drive brick is powered down; ready to be

replaced (swap mode)

or varied on

• Blinks one time every 10 seconds (flash) — drive brick is

powe

red on; operating normally