Release Notes

Quantum Scalar i6000 Release Notes
6-66883-12 Rev A
February 2012
Known Issues 7
32392 1215534
1297050
The device map shows that there was a
communication error between the MCB
and two FC I/O blades, so the FC I/O blade
control LUNs were removed from the
device list. When the MCB tried to connect
to the drive to write the firmware, it
skipped the removed FC I/O blades in the
report LUNs scan and could not create a
path to the drive.
In the past, the FC I/O blades were added
and removed every time communication
was required. Since i8, the connections are
created and there is no recovery if a
connection is lost outside of rebooting the
FC I/O blade.
Reboot the library.
32816 FRU id “rollup report” graph labels are
unreadable
Reduce scope of query.
32818 When generating an Advanced Reporting
Tape Alert report graph, the serial number
and barcode overwrite each other in the
graphical display.
Select a smaller query set, or set the
label to one item, for example,
Media ID.
32820 Reservations not transferred when FC I/O
blade host port fails over.
When the FC ports fail over the host
needs to re-login (PLOGI + PRLI) to
the FCB. Re-login requires that
reservations be re-established.
32821 When setting Host Type to HP_UX and then
performing a LUN mapping operation,
HP-UX host may require a reboot for it to
see and communicate with the devices
attached to the I/O blade.
Reboot the HP-UX host.
33297 The library allows you to select tapes
located in I/E stations for EDLM testing,
but does not actually test them. Then it
indicates the test ran, and displays the
results as “suspect.”
Do not select tapes located in
I/E stations for EDLM testing.
33400 EDLM media scans do not complete
correctly or do not post correct results if a
library inventory is performed at same time
as the EDLM scan.
Take the EDLM library managed
partition offline when performing a
library inventory so that a UI-initiated
inventory does not interfere with any
EDLM media scans. If a media scan is
in process, it will be paused while the
EDLM library managed partition is
offline, and will continue once the
partition is brought online again.
Change
Request
Number
Service
Request
Number Description Workaround