User's Guide

Chapter 3 System Specifications
Physical Specifications
Scalar i2000 Planning Guide 43
Configuration Four 3
The fourth configuration consists of the control module and three
expansion modules. Options include:
• Up to 12 additional LTO or SDLT drives (for a total of 48 drives) (LTO
and SDLT can be mixed)
•Redundant power supplies
• Up to three additional I/E stations
• Additional storage (up to 456 LTO or 380 SDLT cartridges)
The fourth configuration is shown in figure 18 on page 44. Physical
specifications are listed in table 12 on page 44.