User's Guide

Chapter 3 System Specifications
Physical Specifications
Scalar i2000 Planning Guide 41
Configuration Three 3
The third configuration consists of one control module and two
expansion modules. Options include:
• Up to 12 additional LTO or SDLT drives (for a total of 36 drives) (LTO
and SDLT can be mixed)
•Redundant power supplies
• Up to two additional I/E stations
• Additional storage (up to 456 LTO or 380 SDLT cartridges)
The third configuration is shown in figure 17 on page 42. Physical
specifications are listed in table 11 on page 42.