User's Guide

Chapter 3 System Specifications
Physical Specifications
Scalar i2000 Planning Guide 37
Control Module and
Expansion Module Pallet
Specifications 3
IEX Considerations 3
When adding expansion modules, you must consider IEX versions.
1 Take a snapshot of the library.
2 Find out what the IEX H/W Rev is for all the IEX board.
3 If any IEX H/W Rev is under 2, replace the IEX board.
4 If any IEX FW level is under 130, replace the IEX board.
Configuration One 3
The first configuration consists of the control module. The minimal
configuration contains one I/E station and one drive. Options include:
• Combination of up to 12 drives (LTO and SDLT can be mixed)
•Redundant power supply
A diagram of the first configuration is shown in figure 15 on page 38.
Physical specifications are listed in table 9 on page 38.
Table 8 Pallet Dimensions
Height Width Length
84 in.
2133.6 mm
41 in.
1041.4 mm
81 in.
2057.4 mm