User's Guide

Chapter 3 System Specifications

Physical Specifications

Scalar i2000 Planning Guide 35

Customer Library

Connection Types and

Speeds 3

Table 6 lists the library connection types and speeds.

Physical Specifications

This section contains the physical specifications for the library modules.

If the library is installed on a raised floor, the raised floor should be

stabilized to prevent any horizontal movement. The library has four point

loads each on the control and expansion modules. See

table 7 on page 36.

Table 6 Library Connections

Types and Speeds

Connection

a.The DB-9 serial connection on the management control blade is not intended for customer use.

Connector Speed

Fibre Channel on FC I/O Blade LC 2 gigabit/sec (6404)

4 gigabit/sec (7404)

Fibre Channel on management control blade LC 1 gigabit/sec

Ethernet on management control blade RJ45

10/100 Base-T

SCSI-2 on management control blade 68-pin VHDCI Ultra-2 SCSI

Note

The Scalar i2000 control module-only weight is

approximately 600 lbs. This is the weight of a control

module without packaging or media.