User's Guide

Chapter 2 Description
Control Module
Scalar i2000 Planning Guide 14
• Magazines must be installed in the control module starting with back
rack (drive side). Once the back rack (drive side) is full, you must
then install magazines in the door side, starting with the top left
corner. See
figure 5 on page 14.
• The secondary media type is installed beginning at storage slot 4,096
or the first media magazine. See
figure 5 on page 14.
Figure 5 Magazine Installation
Order
door sidedrive side
tape drives
X-axis rail
magazines must
be installed from
bottom to top
tape drives