User's Guide

48 SCSI Commands
Move Medium CDB Format
The MOVE MEDIUM CDB format is shown in the following table.
Medium Transport Element Address – This field contains the address of the Medium Transport element
to use for the move. A value of 0001h is the address for all Medium Transport elements, but a value of 0000h
is also supported to select the default Medium Transport element.
Source Element Address – This field specifies the element address from where the cartridge is retrieved.
Destination Element Address – This field specifies the element address for where the cartridge is to be
placed.
Invert – This field must be set to 0 since the library does not support double-sided media.
Table 44 MOVE MEDIUM CDB format
Bit
Byte
76543210
0 Op Code (A5h)
1 Logical Unit Number Reserved
2
Medium Transport Element Address
3
4
Source Element Address
5
6
Destination Element Address
7
8
Reserved
9
10 Reserved Invert
11 Control