User`s guide

Quantum Scalar 50 User’s Guide 21
Chapter 2
2Basic Library Operations
This chapter describes the following basic library operating procedures:
• Installing Tape Cartridges
• Preparing the Library for Operation
• Turning the Library On and Off
• Using the OCP
• Load Port Configuration
Installing Tape Cartridges
To install tape cartridges:
1 Label each cartridge (see “SDLT Cartridges” on page 24 and “LTO
Cartridges” on page 26 for information on cartridge labels).
2 Set the write-protect switch to either write protect or write enable
(see
“SDLT Cartridges” on page 24 and “LTO Cartridges” on
page 26 for information on write-protect switches).