User`s guide

Appendix E Firmware Upgrade Instructions for Stacked Libraries
Returning the Library Stack Role
Quantum Scalar 50 User’s Guide 233
Returning the Library Stack Role
After the library firmware has been updated on all of the libraries and the
libraries have rebooted, you must return each library to its original
library stack role.
To return the library stack role:
1 Fr
om the OCP, press Setup from the Home screen.
The OCP displays the
Setup screen (see figure 135):
Figure 135 Setup Screen
Enter
2 From the Setup screen, use the up and down arrows to select Cabinet
and press Enter.
The
Cabinet screen displays (see figure 136):
Figure 136 Cabinet Screen
3 Use the up and down arrows to select Stack role and press Enter.
The
Stack role screen displays.