User`s guide

Appendix E Firmware Upgrade Instructions for Stacked Libraries
Uploading Library Firmware
Quantum Scalar 50 User’s Guide 229
Figure 131 Connecting to the
Library SCB
Ethernet port
2 Use the OCP to determine the IP address for the library. The Network
information
is available from the Info menu.
3 On
the host computer, open the internet browser software.
4 In the
Address field, type http://IPaddress/ where IP address is the IP
address for the library.
5 Enter
the username and password and click OK.
The
Overview page displays (see figure 132).
Note: The
default username and password is admin.