User`s guide

Appendix C Installing the Scalar 50 Library
Installing the Library
Quantum Scalar 50 User’s Guide 212
2 Use the up and down arrows to view or edit the date and time
information. Press
Enter to accept the new settings.
3 When you
are finished viewing/editing the date and time
information, press Exit to return to the Setup screen.
Setting Network Information
3
To view or edit the network information:
1 Fr
om the Setup screen, use the up and down arrows to highlight
Network and press Enter.
2 The Ne
twork screen displays (see figure 120):
Figure 121 Network Screen
The Network screen allows you to view or edit the following network
settings:
•DHCP (default setting)
•IP address
•Subnet mask
• Default gateway
3 Use
the up and down arrows to select the network setting you wish
to view or edit and press
Enter.
When you are finished viewing/editing the network information,
press Ex
it to return to the Setup screen.
Note: The
network settings (IP address, subnet mask, and
default gateway) are only active when DHCP is disabled.