User`s guide

Appendix C Installing the Scalar 50 Library
Installing the Library
Quantum Scalar 50 User’s Guide 200
Figure 108 Installing the
Scalar 50 in the Rack
PHILLIPS screws
3 Secure the back of the library to the rack with two mounting clamps
and two Allen screws on each clamp. The mounting clamps are
oriented differently depending on the depth of the rack (see
figure
109).
4 Secu
re the mounting clamps to the rack rails with two PHILLIPS
screws on each side (see figure
109).
Note: If
the rack depth is 27 to 30 in., the long portion of the
clamp is mounted to the back. If the rack depth is 30 to 36
in., the long portion is mounted to the front.