User`s guide

Chapter 3 Quantum Scalar 50 Remote Management
Utilities
Quantum Scalar 50 User’s Guide 131
The firmware image uploads to the library and reboots the library.
Upload Drive Image 3
The upload drive image section allows the user to remotely upload new
tape drive firmware to a specific tape drive within the library.
To upload drive firmware:
1 Select an individual tape drive and number or select an entire cabinet
to update the drive firmware for all tape drives within the library
cabinet.
2 Enter a path and filename where the tape drive firmware exists, or
click
Browse.
3 Click Apply to upload the file.
The firmware image uploads to the tape drive(s) and reboots the
library.
Logs 3
The Logs page displays the drive logs for the individual tape drives
within the library and also a failure analysis file.
To access the Logs page, from the Utilities page, click on the Logs tab at
the top of the page.
The Logs page displays (see figure 93):
Note: The library must be offline to update the drive firmware.