User`s guide

Chapter 3 Quantum Scalar 50 Remote Management
Secure Key
Quantum Scalar 50 User’s Guide 119
3 Enter the same secure key in the Verify Secure Key field.
4 Click
New to create the secure key name/key pair.
Delete Secure Key Name3
Refer to figure 85 for information on Delete Secure Key Name.
Figure 85 Delete Secure Key
Name
The Secure Key Names maintained on the library are displayed in one of
three lists:
•
Unused Secure Keys - keys not associated with any cartridges or tape
drives currently in the system.
•
Inactive Secure Keys - keys associated with cartridges in the library,
or currently assigned to the library, but not assigned to any tape
drives.
•
Active Secure Keys - keys currently assigned to a tape drive.
To delete a
Secure Key Name/Secure Key pair from the library:
Note: The
Secure Key must be at least 8 characters and no more
than 32 characters. The
Secure Key must also contain at
least one non-alphanumeric character and cannot include
spaces or double quotes (““).