User`s guide

Chapter 3 Quantum Scalar 50 Remote Management
Setup
Quantum Scalar 50 User’s Guide 102
4 Enter the Capacity Key (see table 28 for a description of the fields) and
click
Apply.
Table 28 Capacity on Demand
Configuration
Caution: Changes to the number of licensed slots takes effect
immediatly.
5 Click
Reset to return the library to its original settings.
Partitions 3
Library partitioning provides the capability to divide the library’s storage
elements into separate partitions, usable by separate host computers on
the same network. The maximum number of partitions per library is four
partitions; however, the number of partitions is limited by the number of
Note: Capacity on
demand cannot be used in a partitioned
library.
Field Description
Maximum
Lice
nsable Slots
Displays the maximum number of slots that can
be licensed in the library.
Current Licensed
Slots
Displays the current number of slots licensed in
the library.
• 22 SDLT/26 LTO slots =
Level 1 or default
library capacity
• 32 SDLT/38 LTO slots =
Level 2 or full library
capacity
Current Capacity
Key
Displays the current capacity key for the library.
Capacity Key
To enable all of the available slots in the library
(
Level 1 to Level 2 capacity), enter the new
capacity key for the library.