User`s guide

Chapter 3 Quantum Scalar 50 Remote Management
Setup
Quantum Scalar 50 User’s Guide 93
1 To access the iSCSI Bridge page, from the Setup page, click on the
iSCSI Bridge tab at the top of the page.
The
iSCSI Bridge page displays (see figure 64).
Figure 64 iSCSI Page
Bridge links
The iSCSI bridge page displays:
• Cabinet number(s)
• Device number(s)
• IP address for the iSCSI bridge
• Model of the iSCSI bridge
• World wide name for the iSCSI bridge
• Serial number for the iSCSI bridge
• Current firmware revision on the iSCSI bridge
2 Click
Rescan to discover new iSCSI bridges or updated firmware.
3 Click
on the iSCSI bridge you want to manage.
The TC2201 web interface displays. For more information on the
TC22
01 iSCSI bridge and the web interface, see the Quantum TC2201
User’s Guide (PN 81-81539) included on the Quantum Scalar 50
documentation CD.
Network 3
The network information section allows the user to enter network
information so the library can be controlled remotely via an Ethernet
network.