User's Guide

86 Using the Menus
Configure Net Device
IP addresses can be configured for two of the Scalar 24 optional hardware devices. The optional Remote
Management Unit (RMU) provides remote host operation through a Web browser. The optional SNC 450x
provides GbE to SCSI connectivity.
Once you have installed the RMU you configure its IP address by using this menu option. For information
on installing/replacing the RMU, refer to Installing the Remote Management Unit
on page 25.
Once you have installed the SNC 450x, you configure its management port using this menu option. The
SNC 450x data ports are configured by using the SNC Manager. For information on installing/replacing the
SNC 450x or using the SNC Manager, refer to the SNC 450x User’s Guide.
Path:
3 Press and to Enable/Disable the
key click function.
Available options are:
• on: turns on audible tone
• off: disabled
4 Press to highlight Execute ( ) and
then press .
Key clicks are set.
5 A confirmation screen displays. Press
to dismiss.
Selection Description/Result
Main Menu
Setup Menu
Net Device