User's Guide

84 Using the Menus
Set Password
Password allows you to enable or disable a password for access to the library. This enables you to prevent
unauthorized personnel from disrupting the operation of the Scalar 24. If you have set a password, it must
be used to view or execute any of the options in the Setup, Command, or Tools menus. If you have set a
timeout value, after the specified number of minutes of inactivity, you are automatically logged out and you
must re-enter your password. By default, there is no password set on your Scalar 24.
5 A confirmation screen displays. Press
to dismiss.
The timeout value is set.
Note
If the password has been enabled by the SCSI host, you cannot modify or
disable the password using the LCD display on the Scalar 24.
Selection Description/Result
1 From the Setup menu, highlight and
press .
2 Highlight and press .
Sets password.
3 Press and to Enable/Disable the
password function.
Available options are:
• on: password is required to access secure
menu features
• off: disabled
NOTE: If the password has been enabled
by the SCSI host, you cannot modify or disable
the password using the LCD display.
4 Select to move to the Password field.
Selection Description/Result