User's Guide

82 Using the Menus
Set Library SCSI ID
The SCSI ID of the library identifies which ID the library uses to communicate with the host.
10 Press to highlight Execute ( ) and
then press .
The fibre setup is complete.
Selection Description/Result
1 From the Setup menu, highlight and
press .
2 Highlight and press .
Sets the library SCSI ID. You must have at
least one partition set to Random mode to use
this option. Refer to Configure Modes
on page
71 for more information.
3 Press and to select the number you
would like to set for the library.
You must choose a number between 0 and 7.
Ensure that the ID you choose is different than
the drive IDs. The default ID is 0.
4 Press to highlight Execute ( ) and
then press .
The library SCSI ID is set.
5 A confirmation screen displays. Press
to dismiss.
Selection Description/Result