User's Guide

80 Using the Menus
Fibre Setup
Fibre Setup allows you to set adjust settings for fibre drives. You can set the Loop ID, the drive speed, and
the topology of the connection. This feature is not available for libraries with SDLT drives.
3 Press and to enable/disable the
Control Path Mode.
Enables or disables the selected Control Path
Mode.
Available options are:
• Enabled
• Disabled
4 Press to highlight. Execute ( ) and
then press .
The access mode is set.
5 A confirmation screen displays. Press
to dismiss.
Selection Description/Result
1 From the Setup menu, highlight and
press .
2 Highlight and press .
Sets Fibre Channel parameters.
3 Press and to select the drive for
which you want to adjust the settings.
Chooses Drive 1. If Drive 1 is not a fibre drive,
the configurable parameters area uses the
placeholder NA (not available).
Selection Description/Result