User's Guide

Scalar 24 Installation and Operation Guide 69
If an RMU is not installed, skip to Step 46.
NOTE: The IP Address, Subnet Mask,
and Gateway options are only present if a
RMU is installed. These items set up the
network configuration of the RMU.
42 Set the IP Address by pressing and
to change the value of the current field and
and to move between fields.
The current field is highlighted. Make sure you
enter a valid number for each field.
43 Set the Subnet mask by pressing and
to change the value of the current field
and and to move between fields.
The current field is highlighted. Make sure you
enter a valid number for each field.
44 Set the Gateway by pressing and to
change the value of the current field and
and to move between fields.
The current field is highlighted. Make sure you
enter a valid number for each field.
45 From the last field of the Gateway address,
press to set the Gateway mask and
highlight Execute ( ).
46 You have now completed the Setup
Wizard. Press to accept all values and
exit the wizard.
Selection Description/Result