User's Guide

66 Using the Menus
20 If Drive 1 is not a SCSI drive, refer to Step
21.
If Drive 1 is a SCSI drive, press and
to set the ID for Drive 1.
For a SCSI drive, you must choose a number
between 0 and 15.
Default: 1
21 If Drive 1 is not a SCSI drive, press to
go to the fibre settings screen for Drive 1.
If Drive 1 is a SCSI drive, press and
then to accept the SCSI ID displayed
for Drive 1 and move to the next option.
22 If Drive 2 is not a SCSI drive, refer to Step
23.
If Drive 2 is a SCSI drive, press and
to set the SCSI ID for Drive 2.
For a SCSI drive, you must choose a number
between 0 and 15.
Default: 2
23 If Drive 2 is not a SCSI drive, press to
go to the fibre settings screen for Drive 2.
If Drive 2 is a SCSI drive, press and
then to accept the SCSI ID displayed
for Drive 2 and move to the next option.
24 If Drive 1 is a fibre drive, press and
to set the ID for Drive 1.
If Drive 1 is not a fibre drive, refer to Step
25.
For a fibre drive, you must choose a number
between 0-126.
Default: 1
25 If you made changes, press and then
to accept them and move to the next
option. If you did not make changes, press
to go to the next option.
Selection Description/Result