User's Guide

Scalar 24 Installation and Operation Guide 129
Position Picker
Position Picker allows you to move the picker inside the library to a specified location. If you need to
remove a tape manually from the picker, you can position the picker to point to a slot in a magazine near
the front door. If you need to remove a tape manually from the rear slots or drives, you can move the picker
away from the slot you need to access.
Path:
9 A status screen displays the progress of
the test. You can press at any time to
cancel the test.
10 When the test is complete, a completion
message is displayed. Press to
dismiss.
Selection Description/Result
1 From the Tools menu, highlight and
press .
2 Press and to select the target slot to
move the picker to.
TGT = Target slot to position the picker in front
of.
Selection Description/Result
Main Menu
Tool s Me nu
Pos Picker