User's Guide

120 Using the Menus
Tools Menu
The Tools Menu provides access to Scalar 24 utilities. From the Tools Menu you can:
• Manually clean a drive
• Load drive firmware
• Run Demo tests
• Run Self tests
• Run Drive Maintenance tests
• Run Manufacturing tests
• Position the picker
• Output logs
3 To select a drive, press to highlight
and then press .
4 To exit, press
The following information is displayed:
• Status
No Light
Negotiate: negotiating link
Connected
Not Supp.: a fibre drive that does not support
the status check feature or a SCSI drive
Unavail.: a fibre drive that supports the status
check feature but is not responding
• Speed
Auto
1 Gbps
2 Gbps
NA: Not Supp. or Unavail.
• Topology
Auto L: Auto-Configure, trying L-Port first
Auto N: Auto-Configure, trying N-Port first
N Port: Point-to-Point
L Port: Loop
Selection Description/Result