User's Guide
6KLSSLQJWKH/LEUDU\
,QVWDOODWLRQDQG2SHUDWLRQ
Slide the library forward until the rails stop at their spring clips.
Using two people, press the spring clips to disengage the rails and
lift the library out of the rack.
.
If you are shipping the slide rails with the library, use a T-20 TORX
driver to remove the four screws that attach each rack slide rail to
the front and rear of the cabinet. (See the figure on page 5.)
1RWH
If clips nuts are attached to the rack, remove them.
Attach the two rack slide rails to the sides of the library.