User's Guide
&KDSWHU
6FDODU$,7
6WHS²3UHSDUHIRUUHSODFHPHQW
Obtain a flat blade screwdriver. (Some models may require a #1
Phillips screwdriver.)
Ensure that the environment is free of conditions that could cause
electrostatic discharge (ESD). If possible, use an antistatic mat and
grounded static protection wristband during installation. If a mat and
wristband are not available, touch a known grounded surface, such
as the computer's metal chassis.
Unlock and open the library's door (see page 50).
Turn the library's power switch to off.
Disconnect the power cord.
If necessary, reach in and push firmly against the base of the CHM
to move it so it is not blocking access to the tape drives.
:$51,1*
%HIRUHSHUIRUPLQJDQ\RIWKHIROORZLQJVWHSVEH
VXUHWKDWWKHSRZHUVZLWFKLVRIIDQGWKHSRZHU
FRUGLVGLVFRQQHFWHGIURPWKHOLEUDU\