User's Guide

&KDSWHU
 6FDODU$,7
During library configuration, use the operator keys for the following
functions:
Step 2 – Set the SCSI IDs
Default SCSI IDs are assigned at the factory for the library and each tape
drive. Drive blanks are assigned B (for blank). This section describes
how to view the default settings and change them if necessary.
➤
Important
The library and tape drives must each have
a unique SCSI ID within each SCSI bus. Because you may
have multiple buses, the library does not check for
duplicate SCSI IDs. It is your responsibility to make sure
you do not assign duplicate IDs within a bus.
To select an item from a menu: Press
>

@
or
>

@
to scroll up and down
through the items. When the screen
arrow (
→
) points to the desired item,
press
>(QWHU@
.
To move the screen arrow left
and right, or toggle some
options:
Press
>

@
or
>

@
.
To return to a previous screen
or cancel the operation without
saving:
Press
>(VFDSH@
.
To redisplay the Main Screen: Select Main Screen (the first item in the
Main Menu) and press
>(QWHU@
.