User's Guide

&KDSWHU
 6FDODU$,7
6.
Place the magazine on its feet with the single mounting guide toward
the right. Position each cartridge so that the bar code label is on top
and the write-protect switch is toward the front. Insert the cartridge
into the magazine slot.
Note:
Very little force is needed to install a data cartridge. If it
does not snap into place easily or if it protrudes further than
the magazine’s center rib, check the orientation of the
cartridge.
7.
To re-install the magazine, follow the instructions below. You can
access the back magazine by turning the rotor manually.