User's Guide

,QVWDOODWLRQDQG6HWXS
,QVWDOODWLRQDQG2SHUDWLRQ 
Step 1 – Install the library into a rack
If you have a rack-mount library, follow these instructions to install the
library into a standard EIA 19-inch rack.
For this procedure, you will need the following:
S Standard EIA 19-inch rack
S TORX screwdriver with T-25 bit
S T-15 bit, if you need to extend the rails
S Eight 10-32 × 0.5 truss head screws (provided in the accessory box)
S Eight clip nuts (provided in the accessory box), necessary if the rack
does not have threaded holes
WARNING!
Depending on the number of drives installed, the
rack-mount library weighs 50 – 70 pounds (27.2 – 31.8
kg); the standalone library weighs 70 – 90 pounds (31.8 –
40.9 kg). At least 2 people are needed to move or lift the
library. Most of the weight is toward the back of the library.
Make sure you install the rack-mount library in the lowest
possible location in the rack. For best results, use a rack
with extension support legs.