User's Guide

&KDSWHU
 6FDODU$,7
Step 2 – Obtain accessories and equipment
Make certain you have all the accessories and equipment for library
operation, as indicated in the table below. Many of these items are
included in the library accessories box, shipped in a separate box at the
top of the carton.
Required accessories and equipment
Power cord Included with the library. (Page 135
provides power cord specifications for
other voltages and international use.)
Two keys for front door Included with the library.
Jumper(s) for connecting the
library and tape drives to a single
SCSI bus.
Included with the library if two tape
drives are installed.
Eight 10-32
×
0.5 truss head
screws and clip nuts
Included with rack-mount libraries.
Two slide rails, attached to the
sides of the library
SCSI cables If these items are not included with the
library, contact ADIC to purchase them.
If you want to use your own, see
Appendix A for specifications.
SCSI bus terminator(s) (required
if the library or one of the tape
drives is the last device on the
bus)
AIT data cartridges and cleaning
cartridges
If cartridges are not included with the
library, contact ADIC to purchase them.
If you want to use your own, refer to
page 49 for appropriate data cartridges
and to page 59 for appropriate cleaning
cartridges.